CD74ACT174M96E4 Overview
The item is packaged in SOICcases. D flip flop is included in the Tape & Reel (TR)package. In total, it contains 1 elements. A total of 16 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family ACTcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. Despite its superior flexibility, it relies on 7 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D latch operates on 5V volts. For high efficiency, the supply voltage should be set to 5V. It consumes 8μA current. -24mAis set as the high level output current. There is no low level output current set at 24mA. Temperatures below 125°Care ideal for operating. Temperatures above -55°Cshould be used. The minimum voltage required for operation is 4.5V. 5.5Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 80MHz. It uses the logic IC D FLIP-FLOP. There are 1 functions associated with the JK flip flop. 16pins are provided on the D latch. It features maximum design flexibility due to the 24mA output current.
CD74ACT174M96E4 Features
Tape & Reel (TR) package
16 pins
5V power supplies
1 Functions
16 pin count
CD74ACT174M96E4 Applications
There are a lot of Texas Instruments
CD74ACT174M96E4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
