CD74ACT273M Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tubepackage. Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ACTseries of FPGAs. It should not exceed 85MHzin terms of its output frequency. The element count is 1 . A total of 20terminations have been recorded. If you search by 74ACT273, you will find similar parts. The power source is powered by 5V. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the ACTfamily of devices. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. Flip flops designed with 8bits are used in this part. 8 circuits are used to achieve its superior flexibility. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be set to 5V. It offers maximum design flexibility with its output current of 24mA. It operates with 4 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.

CD74ACT273M Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

CD74ACT273M Applications

There are a lot of Texas Instruments CD74ACT273M Flip Flops applications.

• Digital electronics systems
• Frequency Divider circuits
• Communications
• Guaranteed simultaneous switching noise level
• Data transfer
• ESCC
• Common Clocks
• Convert a momentary switch to a toggle switch
• Frequency division
• Pattern generators