CD74ACT273SM96 Overview

20-SSOP (0.209, 5.30mm Width)is the way it is packaged. D flip flop is included in the Cut Tape (CT)package. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. Currently, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74ACT series. You should not exceed 85MHzin its output frequency. The list contains 1 elements. A total of 20 terminations have been made. Members of the 74ACT273family make up this object. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 10pF farads. It belongs to the family of electronic devices known as ACT. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. In order to achieve its superior flexibility, 8 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. A power supply of 5Vis required to operate it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. There are 4 output lines on it. There is a consumption of 8μAof quiescent current from it.

CD74ACT273SM96 Features

Cut Tape (CT) package
74ACT series
20 pins
8 Bits
5V power supplies

CD74ACT273SM96 Applications

There are a lot of Texas Instruments CD74ACT273SM96 Flip Flops applications.

• Communications
• Single Down Count-Control Line
• Circuit Design
• Memory
• EMI reduction circuitry
• ESD performance
• Data transfer
• ESD protection
• Balanced 24 mA output drivers
• Event Detectors