CD74HC109MG4 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. A package named Tubeincludes it. T flip flop uses Differentialas its output configuration. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. It is operating at -55°C~125°C TA. The type of this D latch is JK Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 60MHz. A total of 16terminations have been recorded. The 74HC109family includes it. Power is supplied from a voltage of 4.5V volts. Input capacitance of this device is 10pF farads. A device of this type belongs to the family of HC/UH. Surface Mount mounts this electronic component. This board is designed with 16pins on it. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. As soon as 6Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be kept above 2V for normal operation. Using 2 circuits, it is highly flexible. As a result of its output current of 5.2mA, it is very flexible in terms of design. It consumes a total of 4μA quiescent current at any given time.
CD74HC109MG4 Features
Tube package
74HC series
16 pins
CD74HC109MG4 Applications
There are a lot of Texas Instruments CD74HC109MG4 Flip Flops applications.
- Supports Live Insertion
- Communications
- Control circuits
- Consumer
- Parallel data storage
- Data Synchronizers
- EMI reduction circuitry
- Set-reset capability
- Single Down Count-Control Line
- Patented noise
