CD74HC173PWRE4 Overview
TSSOPis the packaging method. The Tape & Reel (TR)package contains it. A total of 1elements are present in it. A total of 16terminations have been recorded. A voltage of 4.5V provides power to the D latch. It belongs to the family of electronic devices known as HC/UH. There is an electronic part that is mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 4bits. The superior flexibility of this circuit is achieved by using 4 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the chip to function, it has 3output lines. A total of 2input lines have been provided. Quiescent current is consumed by the D latch in the amount of 8μA. Furthermore, it has WITH DUAL OUTPUT ENABLEas a characteristic. A -7.8mAvalue is set for the high level output current. 7.8mA is the low level output current. A temperature below 125°Cis recommended for operation. It is recommended that the operating temperature be greater than -55°C. Despite its minimal supply voltage of 2V, it is capable of operating. 6Vis the maximum supply voltage it supports. We are able to achieve a frequency of 60MHz. The logic IC it uses is D FLIP-FLOP. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 16. In addition to its maximum design flexibility, the output current of the flip flop is 7.8mA.
CD74HC173PWRE4 Features
Tape & Reel (TR) package
16 pins
4 Bits
1 Functions
16 pin count
CD74HC173PWRE4 Applications
There are a lot of Texas Instruments
CD74HC173PWRE4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
