SN74HC74NSRG4 Overview
It is packaged in the way of SOP. It is contained within the Tape & Reel (TR)package. A total of 2 elements are present. It has been determined that there have been 14 terminations. Power is provided by a 5V supply. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. For high efficiency, the supply voltage should be kept at 5V. It has 4lines. A -5.2mAis set for the high level output current. A 5.2mAvalue is set for low-level output current. Ideally, the operating temperature should be lower than 85°C. Operating temperatures should be above -40°C. It is powered by 2V as its minimum supply voltage. There is a maximum supply voltage of 6V. The frequency can be set to 60MHz. D FLIP-FLOPis used as the logic IC in this D flip flop. There are 2 functions available on the JK flip flop. It is equipped with 14 pins. It offers maximum design flexibility with its output current of 5.2mA.
SN74HC74NSRG4 Features
Tape & Reel (TR) package
14 pins
2 Functions
14 pin count
SN74HC74NSRG4 Applications
There are a lot of Texas Instruments
SN74HC74NSRG4 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
