CD74HC174MT Overview

16-SOIC (0.154, 3.90mm Width)is the packaging method. It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Currently, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74HCseries of FPGAs. This D flip flop should not have a frequency greater than 35MHz. D latch consists of 1 elements. A total of 16 terminations have been made. It is a member of the 74HC174 family. Power is provided by a 4.5V supply. A 10pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the HC/UHfamily. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. It is designed with 6bits. Vsup reaches its maximum value at 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 7 circuits to achieve it. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The 5.2mA output current allows it to be designed with the greatest amount of flexibility. It operates with 6 output lines. In terms of quiescent current, it consumes 8μA . Furthermore, it has DUMMY VALas a characteristic.

CD74HC174MT Features

Tape & Reel (TR) package
74HC series
16 pins
6 Bits

CD74HC174MT Applications

There are a lot of Texas Instruments CD74HC174MT Flip Flops applications.

• Bus hold
• Matched Rise and Fall
• Computers
• Event Detectors
• Single Down Count-Control Line
• Consumer
• Divide a clock signal by 2 or 4
• QML qualified product
• Automotive
• Supports Live Insertion