CD74HC4051E Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Through Hole, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature around -55°C~125°C TA extended. 16 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. Try searching with 74HC4051 if you're looking for variants. It has an internal resistance of 160Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 6V in normal situations. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 2V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. It is recommended that you attach at least 1V to your dual power supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. A 8 input needs to be operated. 180MHz bandwidths enable data to be transferred. There is 160Ohm Drain to Source resistance on this electronic part.

CD74HC4051E Features

1 Channels
Bandwidth: 180MHz
Drain-to-Source resistance: 160Ohm

CD74HC4051E Applications

There are a lot of Texas Instruments CD74HC4051E Analog Switches & Multiplexers ICs applications.

• Communication systems
• SDH/SONET multiplexers
• Remote wireless modules
• Battery Powered Systems
• Multi-Line E1 Interface Cards
• E1 Multiplexer
• PDAs
• Multiplexers
• HDTV
• Avionics and Military Systems