CD74HC4051MT Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 1 channels. With a 4.5V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with 74HC4051. In this multiplexer, the internal resistance is 130Ohm. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. Despite this switch's dual supply capability, its voltage should not exceed 5V. If you are using dual power supplies, you should attach at least 1V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. A 8 input needs to be operated. This switch operates within the bandwidth of 180MHz.

CD74HC4051MT Features

1 Channels
Bandwidth: 180MHz

CD74HC4051MT Applications

There are a lot of Texas Instruments CD74HC4051MT Analog Switches & Multiplexers ICs applications.

• PCMCIA cards
• Medical
• PBXs
• ATM
• Wireless Local Loop
• Mechanical reed relay replacement
• Imaging
• Audio and video routing
• PBX interfaces
• Routers