The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 16 series that this electronic component is included. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with 74HC4051. The internal resistance of this digital multiplexer is 130Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 6V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 2V should be applied to the electronic component. For this multiplexer to operate, 16μA current would be sufficient. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. The voltage should be at least 1V if you are using dual power supplies. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. There are 8 inputs to be operated. 180MHz-bandwidths can be used to transfer data between multiplexers. From the Automotive, AEC-Q100 series.
CD74HC4051QPWRQ1 Features
8 Channels 16μA Supply Current Bandwidth: 180MHz
CD74HC4051QPWRQ1 Applications
There are a lot of Texas Instruments CD74HC4051QPWRQ1 Analog Switches & Multiplexers ICs applications.
Intelligent PBX
RGB switches
Precision instrumentation
Sample hold systems
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads