37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)
SOT-23
CD74HC4316MT Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Contact Plating
Gold
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Weight
141.690917mg
Operating Temperature
-55°C~125°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Termination
SMD/SMT
Resistance
320Ohm
Additional Feature
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
4.5V
Terminal Pitch
1.27mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74HC4316
Pin Count
16
Qualification Status
Not Qualified
Max Output Current
25mA
Polarity
Non-Inverting
Number of Channels
4
Max Supply Voltage
6V
Min Supply Voltage
2V
Max Supply Current
16μA
Throw Configuration
SPST
Turn On Delay Time
205 ns
Voltage - Supply, Single/Dual (±)
2V~6V ±1V~5V
Supply Type
Dual, Single
Bandwidth
200MHz
Neg Supply Voltage-Nom (Vsup)
-4.5V
Turn-Off Delay Time
205 ns
Max Dual Supply Voltage
5V
On-State Resistance (Max)
170Ohm
Min Dual Supply Voltage
1V
High Level Output Current
25mA
Dual Supply Voltage
3V
Low Level Output Current
25mA
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
62 dB
Current - Leakage (IS(off)) (Max)
100nA
Channel Capacitance (CS(off), CD(off))
5pF
On-state Resistance Match-Nom
5Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
37ns, 37ns
Channel-to-Channel Matching (ΔRon)
5 Ω
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height Seated (Max)
1.75mm
Length
9.9mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$1.895803
$1.895803
10
$1.788494
$17.88494
100
$1.687258
$168.7258
500
$1.591753
$795.8765
1000
$1.501654
$1501.654
CD74HC4316MT Product Details
CD74HC4316MT Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 16 terminations. By its 4 channels, the electronic component provides high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. A SPST - NO switching circuit is used for these analog switches. Look for analog switch ic variants by searching with 74HC4316. This digital multiplexer has 320Ohm internal resistance. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. If you put voltage higher than 16μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 5V. When using dual power supplies, you should attach at least 1V. 200MHz-bandwidths can be used to transfer data between multiplexers. Additional features of the electronic component include: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.
CD74HC4316MT Features
4 Channels Switch Circuit: SPST - NO Bandwidth: 200MHz Additional Features: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
CD74HC4316MT Applications
There are a lot of Texas Instruments CD74HC4316MT Analog Switches & Multiplexers ICs applications.
T1/E1 Terminals
Existing multiplexer applications (both fault-protected and nonfault-protected)
Cell phones
Signal routing between systems
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads