37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
CD74HC4316PWT Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Weight
61.887009mg
Operating Temperature
-55°C~125°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Discontinued
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Termination
SMD/SMT
Resistance
170Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
4.5V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74HC4316
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Number of Channels
1
Max Supply Voltage
6V
Min Supply Voltage
2V
Max Supply Current
16μA
Throw Configuration
SPST
Turn On Delay Time
47 ns
Number of Inputs
4
Voltage - Supply, Single/Dual (±)
2V~6V ±1V~5V
Supply Type
Dual, Single
Bandwidth
200MHz
Neg Supply Voltage-Nom (Vsup)
-4.5V
Turn-Off Delay Time
47 ns
Max Dual Supply Voltage
5V
On-State Resistance (Max)
170Ohm
Min Dual Supply Voltage
1V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
62 dB
Current - Leakage (IS(off)) (Max)
100nA
Channel Capacitance (CS(off), CD(off))
5pF
On-state Resistance Match-Nom
5Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
37ns, 37ns
Channel-to-Channel Matching (ΔRon)
5 Ω
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height Seated (Max)
1.2mm
Length
5mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
CD74HC4316PWT Product Details
CD74HC4316PWT Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature extended to -55°C~125°C TA. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. Multiplexers built on a SPST - NO switching circuit are built. Search with 74HC4316 if you are looking for analog multiplexer variants. It has an internal resistance of 170Ohm. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. Dual, Single supply type digital switch with a low cost. There should be 2V voltage fed to the electrical part below 2V. A digital multiplexer may suffer damage if voltage is applied above 16μA. There is no problem with using dual supply voltage, but it should not exceed 5V. If you are using a dual power supply, you should attach at least 1V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating 4 inputs is required. This switch operates within the bandwidth of 200MHz. Additional features of the electronic component include: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.
CD74HC4316PWT Features
1 Channels Switch Circuit: SPST - NO Bandwidth: 200MHz Additional Features: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
CD74HC4316PWT Applications
There are a lot of Texas Instruments CD74HC4316PWT Analog Switches & Multiplexers ICs applications.