CD74HC564E Overview

The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. As configured, the output uses Tri-State, Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Through Hole. A voltage of 2V~6Vis required for its operation. Currently, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74HCseries of FPGAs. There should be no greater frequency than 60MHzon its output. A total of 1elements are contained within it. As a result, it consumes 8μA quiescent current and is not affected by external forces. The number of terminations is 20. You can search similar parts based on 74HC564. A voltage of 4.5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 10pF farads. HC/UHis the family of this D flip flop. Through Hole mounts this electronic component. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. The design is based on 8bits. It reaches 6Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. A power supply of 2/6Vis required to operate it. The flip flop contains 2ports. It offers maximum design flexibility with its output current of 7.8mA. In order to operate, the chip has 3 output lines. It is of 8 channels.

CD74HC564E Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

CD74HC564E Applications

There are a lot of Texas Instruments CD74HC564E Flip Flops applications.

• Latch-up performance
• Supports Live Insertion
• Data Synchronizers
• Data transfer
• Bounce elimination switch
• Counters
• Synchronous counter
• Patented noise
• Load Control
• Frequency Divider circuits