CD74HC574M96 Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. -55°C~125°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74HCseries of FPGAs. A frequency of 60MHzshould be the maximum output frequency. In total, there are 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74HC574family make up this object. A voltage of 4.5V provides power to the D latch. A 10pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the HC/UHfamily. A part of the electronic system is mounted in the way of Surface Mount. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. An electronic part with 8bits has been designed. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 8 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. The D latch runs on a voltage of 2/6V volts. This D flip flop is equipped with 0 ports. As a result of its output current of 7.8mA, it is very flexible in terms of design. There are 3 output lines in this JK flip flop. 8μAquiescent current consumed.

CD74HC574M96 Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

CD74HC574M96 Applications

There are a lot of Texas Instruments CD74HC574M96 Flip Flops applications.

• Shift registers
• Synchronous counter
• Computers
• Single Down Count-Control Line
• Differential Individual
• Functionally equivalent to the MC10/100EL29
• Guaranteed simultaneous switching noise level
• Asynchronous counter
• Data transfer
• ESD protection