CD74HC75MG4 Overview

In the SOIC package, it can be found as an embedded module. Rail/Tube is the way in which it is packaged. The design of this electronic part contains 2 bits. This device has been designed with 16 terminations available. The device works with a voltage of 4.5V for its supply voltage. There are 16 pins attached to it. It is a member of the HC/UH family of electronic devices. This board has 16 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This part can be found within the FF/Latches subcategory. It contains 4 input lines where electronic circuits are present. It consumes 4μA current from its quiescent state without being affected by external factors at all. A total of 2 elements are contained in it. 5.2mA is set as the low level output current. -5.2mA is set as the high level output current. It is recommended to work at a temperature lower than 125°C. In order for the system to operate properly, the operating temperature should be higher than -55°C. It is capable of providing a maximum supply voltage of 6V. In order for the machine to operate, the supply voltage must be 2V. A logic IC that is used in this application is D LATCH. The output current of this device is 5.2mA, which makes it a very flexible design element.

CD74HC75MG4 Features

SOIC package
2 Bits
16 pin count
16 pins
2 elements

CD74HC75MG4 Applications

There are a lot of Texas Instruments
CD74HC75MG4 Latches applications.

• Digital bus buffer
• Flip-flops
• Parallel data synchronization
• Parallel data storage
• Shift register
• Pattern generators
• Automotive Infotainment
• Automotive Cluster
• Automotive ADAS
• Automotive Body Electronics