CD74HCT4051M96G4 Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. A total of 1 circuits make up this switch device. Try searching for 74HCT4051 variants of the analog switch ic. An switch multiplexer with 130Ohm internal resistance has a value of 130Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. An effective Dual, Single supply digital multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 1V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. There is a voltage range of 5V operating voltages for the electrical part. A 8 input needs to be operated. There are 180MHz bandwidths for data transfer.

CD74HCT4051M96G4 Features

1 Channels
Bandwidth: 180MHz

CD74HCT4051M96G4 Applications

There are a lot of Texas Instruments CD74HCT4051M96G4 Analog Switches & Multiplexers ICs applications.

• Low-Voltage
• Channel Banks
• Avionics test equipment
• Voice over IP/DSL – Integrated Access Devices, Smart
• DVD-R
• Cross Connects
• PBX interfaces
• PDAs
• Cable PC
• Precision instrumentation