CD74HCT4051MG4 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 16. A high-quality output is provided by the electrical component's 1 channels. A 4.5V voltage supply should turn on and run the electronic component. The electronic part body is injected with 16 pins. There are 1 circuits in this switch device. 74HCT4051 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 130Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 4.5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. There is a voltage range of 5V operating voltages for the electrical part. The electrical component supports 8 inputs. 180MHz bandwidths enable data to be transferred.

CD74HCT4051MG4 Features

1 Channels
Bandwidth: 180MHz

CD74HCT4051MG4 Applications

There are a lot of Texas Instruments CD74HCT4051MG4 Analog Switches & Multiplexers ICs applications.

• Battery Powered Instruments
• SONET/SDH ADM
• 65 V DACs
• Battery-powered systems
• Routers
• Remote wireless modules
• Low-Voltage
• Audio/video switches
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Avionics and Military Systems