CD74HCT4053PWRG4 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 16 terminations. A electrical component with 3 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. These analog multiplexers are built based on SPDT switching circuits. There are 3 circuits in this multiplexer. Look for analog switch ic variants by searching with 74HCT4053. Analog switches have 130Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. A dual power supply should have at least 1V voltage attached. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Operating voltages range from 5V. The electrical component supports 6 inputs. It is possible to transfer data over a 200MHz-bandwidth. It conducts in a 2-bit manner.

CD74HCT4053PWRG4 Features

3 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
2-Bit

CD74HCT4053PWRG4 Applications

There are a lot of Texas Instruments CD74HCT4053PWRG4 Analog Switches & Multiplexers ICs applications.

• Private Branch Exchange (PBX)
• ATM
• Optical Applications
• Fiber In The Loop (FITL)
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Low-Voltage
• Industrial
• Multi-Line E1 Interface Cards
• Microprocessor Controlled Analog Systems
• Relay replacements