In order to package it as a clock IC, the Cut Tape (CT) package is used. The 24-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. It contains a total of 24 terminations within RF synthesizer. The supply voltage of 3.3V allows for high efficiency. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. Thanks to the Surface Mount, this electric component can easily be installed on a panel. This clock generator would require a maximum supply voltage of 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. PLL Clock Driver is the type of electrical part that this component is classified as. It is a 24-bit clock PLL designed specifically for microprocessors. This part number CDC2509 is related to the following electrical components. PF synthesizers is equipped with 24 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. In general, this clock PLL is considered a Clock Drivers device. 9 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.2 ns Max, this analog clock generator exhibits low timing skew. When operated at 125MHz, frequency synthesizer achieves high efficiency. The load capacitance is 30pF. The TR package suits this RF synthesizer ideally.
CDC2509BPWR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 30pF
CDC2509BPWR Applications
There are a lot of Texas Instruments CDC2509BPWR Clock Generators applications.