As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. As part of the 28-SSOP (0.209, 5.30mm Width) package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. In it, there are 28 terminations to be found. Basically, this time clock generator needs a voltage of 3.3V. In this case, TTL is designed to be the input of the clock generator. Using 1 circuits, the electronic part's full performance can be accessed. Thanks to the Surface Mount, this electric component can easily be installed on a panel. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on test statistics, ambient temperature should be set at 0°C~70°C. It's compatible with LVTTL logic levels. It is possible to classify this electronic component as a PLL Clock Driver. It is a 28-bit clock PLL designed specifically for microprocessors. These related electrical parts are available for the base part number CDC536. There are a number of 28 pins that are available on the clock generators. Supply voltage 3.3V is what time clock generator can handle. The device is usually classified as a type of Clock Drivers device. 6 signal outputs are provided for enhancing output frequency as much as possible. At 0.5 ns Max, this analog clock generator exhibits low timing skew. By searching for parts that belong to the 536 family, you can find electronic parts that are similar. At a frequency of 100MHz, the system can achieve high efficiency. In other words, PLL is capable of delivering a load capacitance of 30pF. A clock generator ic such as this would be well suited to the TR package.
CDC536DBRG4 Features
Available in the 28-SSOP (0.209, 5.30mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 30pF
CDC536DBRG4 Applications
There are a lot of Texas Instruments CDC536DBRG4 Clock Generators applications.