As a clock IC, it is packaged by the Tape & Reel (TR) method. 20-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As a result, frequency synthesizers can be found to contain 20 terminations. This electronic frequency generator requires a voltage of 3.3V. LVCMOS, LVTTL is designed as this clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. An upper frequency limit of 74MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The supply voltage (Vsup) should be kept above 3V for normal operation. This clock PLL works with a supply voltage of 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. LVCMOS, LVTTL logic levels are supported by this RF synthesizer. PLL Clock Generator is the type of electrical part that this component is classified as. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. According to the base part number CDC5806, its related parts can be found. The frequency synthesizer has 20 pins that are available. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. Clock PLL has 6 signal outputs to maximi6e output frequency. When operated at 54MHz, frequency synthesizer achieves high efficiency. I would like to briefly introduce you to a 3-element frequency synthesizer that performs well with low jitter.
CDC5806PWRG4 Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CDC5806PWRG4 Applications
There are a lot of Texas Instruments CDC5806PWRG4 Clock Generators applications.