As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 64-BGA package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 64 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, LVPECL is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 3.6V. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with LVPECL logic levels. This electronic component can be classified as a Clock Synchronizer and Jitter Cleaner. This clock-generating IC is a 64-bit device designed explicitly for microprocessors. According to the base part number CDC7005, its related parts can be found. There is an available 64 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. Clock PLL is facilitated with 5 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.06 ns Max. Frequency generator is able to reali800MHze high efficiency when operating at a frequency of 800MHz. The TR package suits this RF synthesizer ideally. 1 inputs are employed on this electronic frequency generator.
CDC7005ZVAR Features
Available in the 64-BGA Supply voltage of 3.3V Operating supply voltage of 3.3V
CDC7005ZVAR Applications
There are a lot of Texas Instruments CDC7005ZVAR Clock Generators applications.