Clock ICs are packaged using the Cut Tape (CT) method. In the 64-BGA package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 64 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVCMOS, LVPECL is designed to be the input of the clock generator. The frequency generator has a maximum frequency of 800MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in LVPECL logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock Synchronizer and Jitter Cleaner. An IC that generates clocks specifically for microprocessors, this clock PLL is 64-bits in si64e. The related electrical components for the base part number CDC7005 can be found below. A 64 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. The output frequency is magnified as high as possible with 5 signal outputs. The timing skew of this frequency synthesizer is low at 0.06 nsmax. By operating at a frequency of 180MHz, frequency generator is able to achieve high efficiency. There is no doubt that the TR package is an ideal fit for this clock generator ic. There are 1 inputs on this clock generator.
CDC7005ZVAT Features
Available in the 64-BGA Supply voltage of 3.3V Operating supply voltage of 3.3V
CDC7005ZVAT Applications
There are a lot of Texas Instruments CDC7005ZVAT Clock Generators applications.