It is packaged using the Tape & Reel (TR) method since it is a clock IC. This clock generator is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 48 terminations. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock, Crystal. Using 1 circuits, the electronic part's full performance can be accessed. Because of the Surface Mount, clock PLL can be easily mounted on the panel. In terms of supply voltage, RF synthesizer works with 3.135V~3.465V. Test statistics estimate a temperature of 0°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of CMOS, HSCL logic. An electrical part such as this one can be classified as a Clock/Frequency Synthesizer component. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. It is possible to find its related electronic parts by searching for the base part number CDC950. It is possible to connect to the PLL via 48 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. As a result, it is commonly classified as a type of Clock Generators clock PLL. The frequency synthesizer features 12 signal outputs to ensure as high a frequency as possible. At a frequency of 133MHz, frequency generator is capable of achieving high efficiency. An 8-element clock PLL with a low jitter performance is available on this page.
CDC950DGGRG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CDC950DGGRG4 Applications
There are a lot of Texas Instruments CDC950DGGRG4 Clock Generators applications.
Cable television converter boxes
Test and instrumentation equipment
Simple clock clean-up circuits
Clock signals to the high-speed Digital RF circuits