This clock IC is packaged using the Tape & Reel (TR) method. 24-SSOP (0.154, 3.90mm Width) contains this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. Basically, this time clock generator needs a voltage of 3.3V. This Clock PLL will be fed by HSTL, LVPECL, LVTTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 280MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximum voltage this clock PLL can handle is 3.6V. This frequency synthesizer requires a supply voltage above 3V to be safe. This clock PLL works with a supply voltage of 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. This is a clock generator compatible with HSTL, LVDS, LVPECL, LVTTL, SSTL logic levels. It is possible to classify this electronic component as a PLL Multiplier/Divider. In particular, this clock PLL is designed to be used with microprocessors. The related electronic parts of part number CDCF5801 are listed below. There is an available 24 pin on the clock generators. The maximum supply voltage that clock generator can handle is 3.3V. Fundamentally, this is a kind of Clock Drivers clock PLL. In order to provide better clock signal output, this frequency synthesizer is equipped with DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE. This clock generator ic is ideal for the TR package that comes with it.
CDCF5801DBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CDCF5801DBQR Applications
There are a lot of Texas Instruments CDCF5801DBQR Clock Generators applications.