As a clock IC, it is packaged by the Tube method. The 48-TFSOP (0.240, 6.10mm Width) package embeds this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. 48 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 2.5V. This Clock PLL will be fed by LVTTL, SSTL-2 as its input. To access the electronic component's full performance, 1 circuits are implemented. PLL clock is mounted in the way of Surface Mount. The maximal supply voltage this clock generator would take is 2.7V. For safety reasons, this frequency generator's supply voltage should remain above 2.3V. This clock PLL works with a supply voltage of 2.3V~2.7V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. SSTL-2 logic levels are supported by this RF synthesizer. As far as electrical parts go, this component can be classified as a PLL Clock Driver component. Clock PLL is equipped with 48 pin count. According to the base part number CDCV850, its related parts can be found. It is possible to connect to the frequency generators via 48 pins. RF synthesizers can handle voltages up to 2.5V. In general, this clock PLL is considered a Clock Drivers device. Clock PLL is configured with 10 output. As a result of this digital clock generator, there is a low timing skew at 0.075 ns max. The 850 family of parts can be used to find electric parts that are similar to each other. At a frequency of 140MHz, the system can achieve high efficiency.
CDCV850IDGG Features
Available in the 48-TFSOP (0.240, 6.10mm Width) Supply voltage of 2.5V Operating supply voltage of 2.5V
CDCV850IDGG Applications
There are a lot of Texas Instruments CDCV850IDGG Clock Generators applications.
Navigation, positioning and surveillance system for aircraft, ships and ships