The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.295, 7.50mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 8:1. The operating temperature is extended to around -40°C~105°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 8 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. A total of 1 circuits make up this switch device. Try searching with 74LV4051 if you're looking for variants. A 75Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 20μA current. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. The 8 inputs need to be operated in order to work. There are 35MHz bandwidths for data transfer. The Automotive, AEC-Q100 series contains it.
CLV4051ATDWRG4Q1 Features
8 Channels 20μA Supply Current Bandwidth: 35MHz
CLV4051ATDWRG4Q1 Applications
There are a lot of Texas Instruments CLV4051ATDWRG4Q1 Analog Switches & Multiplexers ICs applications.
Cable Telephony – NIU, Set-Top Box, Home Side Box
PDH Multiplexers
65 V DACs
MP3 players
Audio/video switches
Data switching
High reliability control systems
Existing multiplexer applications (both fault-protected and nonfault-protected)
High speed data transmission line cards
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads