CLVC574AQPWRG4Q1 Overview

The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 2V~3.6Vvolts. A temperature of -40°C~125°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74LVC series. It should not exceed 150MHzin its output frequency. In total, it contains 1 elements. The number of terminations is 20. It is a member of the 74LVC574 family. The power source is powered by 2.7V. A 4pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. In this case, the electronic component is mounted in the way of Surface Mount. 20pins are included in its design. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. There is a 3.6Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. In order to achieve its superior flexibility, 8 circuits are used. Due to its reliability, this T flip flop is well suited for TR. The D latch operates on 3.3V volts. The D flip flop has no ports embedded. It consumes 10μA of quiescent current without being affected by external factors.

CLVC574AQPWRG4Q1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
20 pins
8 Bits
3.3V power supplies

CLVC574AQPWRG4Q1 Applications

There are a lot of Texas Instruments CLVC574AQPWRG4Q1 Flip Flops applications.

• Frequency Dividers
• Asynchronous counter
• Control circuits
• ATE
• Safety Clamp
• Communications
• Bus hold
• Dynamic threshold performance
• High Performance Logic for test systems
• Storage Registers