CY74FCT2374TSOCG4 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74FCT series. You should not exceed 250MHzin the output frequency of the device. There are 1 elements in it. As a result, it consumes 200μA quiescent current and is not affected by external forces. 20terminations have occurred. If you search by 74FCT2374, you will find similar parts. It is powered by a voltage of 5V . A JK flip flop with a 5pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the FCTfamily of devices. It is mounted by the way of Surface Mount. The 20pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. As soon as 5.25Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be above 4.75V. The system runs on a power supply of 5V watts. A D flip flop with 2embedded ports is available. In order for the chip to function, it has 8output lines.
CY74FCT2374TSOCG4 Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374TSOCG4 Applications
There are a lot of Texas Instruments CY74FCT2374TSOCG4 Flip Flops applications.
- Computing
- Frequency Divider circuits
- Differential Individual
- Bounce elimination switch
- Functionally equivalent to the MC10/100EL29
- Supports Live Insertion
- Single Up Count-Control Line
- CMOS Process
- Communications
- Modulo – n – counter
