CY74FCT374CTQCT Overview

As a result, it is packaged as 20-SSOP (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 4.75V~5.25V. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74FCT series. Its output frequency should not exceed 250MHz Hz. The list contains 1 elements. It consumes 200μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. D latch belongs to the 74FCT374 family. Power is supplied from a voltage of 5V volts. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In terms of electronic devices, this device belongs to the FCTfamily of devices. This electronic part is mounted in the way of Surface Mount. 20pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 8bits are used in this part. Using 8 circuits, it is highly flexible. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be set to 5V. As a result of its output current of 64mA, it is very flexible in terms of design. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.

CY74FCT374CTQCT Features

Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT374CTQCT Applications

There are a lot of Texas Instruments CY74FCT374CTQCT Flip Flops applications.

• Differential Individual
• Clock pulse
• ESD protection
• Synchronous counter
• Balanced Propagation Delays
• Digital electronics systems
• EMI reduction circuitry
• Convert a momentary switch to a toggle switch
• Common Clocks
• Safety Clamp