CY74FCT374TSOC Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 4.75V~5.25V. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74FCT series. You should not exceed 250MHzin its output frequency. A total of 1 elements are present. It consumes 200μA of quiescent Currently, there are 20 terminations. If you search by 74FCT374, you will find similar parts. Power is provided by a 5V supply. JK flip flop input capacitance is 5pF farads. Electronic devices of this type belong to the FCTfamily. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. This flip flop is designed with 8 Bits. The superior flexibility of this circuit is achieved by using 8 circuits. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. For high efficiency, the supply voltage should be set to 5V. With a current output of 64mA , it offers maximum design flexibility. It operates with 3 output lines.

CY74FCT374TSOC Features

Tube package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT374TSOC Applications

There are a lot of Texas Instruments CY74FCT374TSOC Flip Flops applications.

• Registers
• Safety Clamp
• ESCC
• 2 – Bit synchronous counter
• Count Modes
• Shift registers
• EMI reduction circuitry
• High Performance Logic for test systems
• Cold spare funcion
• Test & Measurement