CY74FCT377ATSOCTG4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. Non-Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74FCT series. A total of 1elements are contained within it. During its operation, it consumes 200μA quiescent energy. Terminations are 20. It is a member of the 74FCT377 family. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 5pF farads. An electronic device belonging to the family FCTcan be found here. Electronic part Surface Mountis mounted in the way. It is designed with 20 pins. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 8. Vsup reaches 5.25V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 4.75V is necessary for normal operation. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The system runs on a power supply of 5V watts. The output current of 64mA makes it feature maximum design flexibility. It operates with 8 output lines.
CY74FCT377ATSOCTG4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377ATSOCTG4 Applications
There are a lot of Texas Instruments CY74FCT377ATSOCTG4 Flip Flops applications.
- CMOS Process
- 2 – Bit synchronous counter
- Counters
- Modulo – n – counter
- Registers
- Power down protection
- Asynchronous counter
- Consumer
- Divide a clock signal by 2 or 4
- Safety Clamp
