SN74HC273QDWRQ1 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. A temperature of -40°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. The FPGA belongs to the Automotive, AEC-Q100, 74HC series. In order for it to function properly, its output frequency should not exceed 60MHz. A total of 1elements are present in it. As a result, it consumes 8μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HC273family includes it. Power is supplied from a voltage of 5V volts. There is 3pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. Surface Mount mounts this electronic component. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It is reported that there are 2 input lines.
SN74HC273QDWRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
8 Bits
SN74HC273QDWRQ1 Applications
There are a lot of Texas Instruments SN74HC273QDWRQ1 Flip Flops applications.
- Buffered Clock
- Count Modes
- Buffer registers
- Communications
- Power down protection
- ESCC
- Shift registers
- Clock pulse
- Convert a momentary switch to a toggle switch
- Pattern generators
