CY74FCT377CTSOC Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is included in the package Tube. As configured, the output uses Non-Inverted. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74FCT series. The element count is 1 . As a result, it consumes 200μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74FCT377 family contains it. Power is provided by a 5V supply. Input capacitance of this device is 5pF farads. In this case, the D flip flop belongs to the FCTfamily. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. In order for the device to operate, it requires 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. 8input lines are available for you to choose from.

CY74FCT377CTSOC Features

Tube package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT377CTSOC Applications

There are a lot of Texas Instruments CY74FCT377CTSOC Flip Flops applications.

• Single Down Count-Control Line
• Memory
• Balanced Propagation Delays
• Bus hold
• Circuit Design
• Load Control
• Functionally equivalent to the MC10/100EL29
• Memory
• EMI reduction circuitry
• Control circuits