CY74FCT821BTSOC Overview

The package is in the form of 24-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74FCT series. There are 1 elements in it. As a result, it consumes 200μA of quiescent current without being affected by external factors. There are 24 terminations,JK flip flop belongs to 74FCT821 family. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 5pF farads at the input. It is a member of the FCTfamily of D flip flop. It is mounted by the way of Surface Mount. With its 24pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. An electronic part with 10bits has been designed. A total of 5V power supplies are needed to run it. A D flip flop with 2embedded ports is available. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With an output current of 64mA, it is possible to design the device in any way you want. There are 10 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

CY74FCT821BTSOC Features

Tube package
74FCT series
24 pins
10 Bits
5V power supplies

CY74FCT821BTSOC Applications

There are a lot of Texas Instruments CY74FCT821BTSOC Flip Flops applications.

• Single Up Count-Control Line
• Computers
• Registers
• Storage Registers
• Buffered Clock
• Communications
• 2 – Bit synchronous counter
• Frequency division
• Data Synchronizers
• Safety Clamp