CY74FCT825CTQCTG4 Overview
The flip flop is packaged in a case of SSOP. D latch consists of 1 elements. Terminations are 24. The power source is powered by 5V. Electronic devices of this type belong to the FCTfamily. Electronic part Surface Mountis mounted in the way. With its 24pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. The D flip flop has no ports embedded. In order to ensure high efficiency, the supply voltage should remain at 5V. It is set to -32mAfor the high level output current. It is set to 64mAfor the low level output current. If the operating temperature is lower than 85°C, it is recommended. It should be higher than -40°Cwhen the system is operating. Normally, it operates with a voltage of 4.75VV as its minimum supply voltage. It supports a maximum supply voltage of 5.25V volts. In this case, it uses a BUS DRIVER logic IC. It is equipped with 1 functions . The D latch is equipped with 24 pins. As a result of its output current of 64mA, it is very flexible in terms of design.
CY74FCT825CTQCTG4 Features
24 pins
5V power supplies
1 Functions
24 pin count
CY74FCT825CTQCTG4 Applications
There are a lot of Texas Instruments
CY74FCT825CTQCTG4 Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
