Tube 44-TSSOP (0.244, 6.20mm Width) Exposed Pad PWM 10.8V~13.2V Surface Mount -40°C~150°C TJ DC Motors, Stepper Motors Half Bridge (4) Inductive 0V~52.5V
SOT-23
DRV8412DDW Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Lifecycle Status
ACTIVE (Last Updated: 1 day ago)
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
44-TSSOP (0.244, 6.20mm Width) Exposed Pad
Number of Pins
44
Operating Temperature
-40°C~150°C TJ
Packaging
Tube
JESD-609 Code
e4
Feature
Status Flag
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
44
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Applications
DC Motors, Stepper Motors
Voltage - Supply
10.8V~13.2V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
50V
Terminal Pitch
0.635mm
Base Part Number
DRV8412
Pin Count
44
Number of Outputs
2
Output Voltage
5V
Max Output Current
6A
Operating Supply Voltage
50V
Interface
PWM
Analog IC - Other Type
STEPPER MOTOR CONTROLLER
Operating Supply Current
10.5mA
Output Configuration
Half Bridge (4)
Output Current
6A
Output Current per Channel
3A
Collector Emitter Voltage (VCEO)
52V
Max Collector Current
6A
Voltage - Load
0V~52.5V
Fault Protection
Current Limiting, Over Temperature, Short Circuit, UVLO
Rds On (Typ)
110m Ω LS, 110m Ω HS
Switching Frequency
500kHz
Motor Type
Brushed
Load Type
Inductive
Height
1.2mm
Length
14mm
Width
6.1mm
Thickness
1.5mm
REACH SVHC
No SVHC
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$8.42000
$8.42
10
$7.60700
$76.07
35
$7.25286
$253.8501
105
$6.29762
$661.2501
525
$5.48390
$2879.0475
1,015
$4.77630
$4.7763
DRV8412DDW Product Details
DRV8412DDW Overview
In order to package H bridge, Tube is used.H bridge is included in the 44-TSSOP (0.244, 6.20mm Width) Exposed Pad package as a cost-saving measure.Based on the supply voltage of 10.8V~13.2V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, Stepper Motors.On the PCB H gate is mounted using Surface Mount.Full bridge also has a number of specific characteristics, including Status Flag.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 44 terminations are employed.Signal interfaces include 44 pins that serve as pronged contacts.The base H bridge ic number of DRV8412 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 50V is required.H bridge circuit contains an analog IC type STEPPER MOTOR CONTROLLER.During a specified ambient temperature, the power supply can supply the maximum load current 6A.The power supply pins and the output pins are conducting a current of 6A.It is through the 44 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 2.The operating supply voltage is maintained at 50V in order to ensure high efficiency.Hbridge 5V releases voltage.
DRV8412DDW Features
Available in 44-TSSOP (0.244, 6.20mm Width) Exposed Pad Package / Case Operating Temperature at the range of Surface Mount Interface IC Type : DRV8412 Number of Receivers: 50V
DRV8412DDW Applications
There are a lot of Texas Instruments DRV8412DDW Full Bridge Drivers, Half-Bridge Drivers applications.