DS90LV001TMX/NOPB Overview

For convenience, power buffer comes packaged in 8-SOIC (0.154, 3.90mm Width).In Tape & Reel (TR) packages, power buffer is ready to be shipped out.It comes with a universal mout that allows for easy adaptation.It is important to note that this is a typical Buffer, ReDriver type.There is 3V~3.6V voltage used by this op amp buffer.Hence, it facilitates the entry of CML, LVDS, LVPECL into the system.A -40°C~85°C operating temperature is recommended to avoid malfunctions.There are a variety of applications for this operational amplifier buffer, including LVDS.You can also try searching with "DS90LV001" when you need specific pin-to-pin solutions for your special needs.8 terminals are on the op amp buffer.Its peak reflow temperature is 260 when it is being reflowed.Supplied by 3.3V voltage, the splitter can accomplish the many demanding tasks.This Power buffer has a pinout that starts from its 8 pins, which are the first pins on the board.The 8 pins are on it.It has a Surface Mount for mouting on PCB or other boards.In the industry, other Line Driver or Receivers like the power buffer play an important role.The power buffer is powered by 70mA voltage.The voltage required for normal operation is 3.3V.1-Bit receiver is used.In the most extreme case, this splitter dissipates 726mW watts.Interface repeater signal based on 1 elements.

DS90LV001TMX/NOPB Features

Mainly used in LVDS.
A standard Line Driver or Receivers.
1-Bit receiver.

DS90LV001TMX/NOPB Applications

There are a lot of Texas Instruments DS90LV001TMX/NOPB Signal Buffers, Repeaters, Splitters applications.

• Network Switches/Routers
• SATA SSDs or HDDs
• Data or Clock Signal Amplification
• Test Equipment
• Desktop Computers
• Cable Repeaters
• Multidrop Buses
• Loopback
• Storage Area Networks
• Digital Cross-Connects