INA114AU Overview

In the package, you will find a 16-SOIC (0.295, 7.50mm Width)-case to contain the op amp ic. An op amp of this type is a Instrumentation-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 16. Buffer amplifier has a total of 16 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. 16 pins are located on the operational amplifiers. There is an input offset voltage of 125μV for this buffer op amp. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 2.2mA . There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 3. There is an 2.2mA quiescent current running through op amp ic. 10GOhm is the range in which the instrumentation amplifier resistance should lie.

INA114AU Features

16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm

INA114AU Applications

There are a lot of Texas Instruments INA114AU Instrumentational OP Amps applications.

• Non-polarized electrodes
• Thermocouples
• Semiconductor detectors
• Signal filtering
• Video amplifiers
• Addition operation circuits
• Biopotential
• Power generator
• Inverse/same-phase proportional circuit
• Scintillation detectors