INA122UA/2K5G4 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A Instrumentation-type buffer amplifier is shown here. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 50μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Voltage gain should remain at 80dB. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The instrumentation amplifier is packed in the form of TR. There is an 60μA quiescent current running through op amp ic. Op amp resistance should stay within the range of 10GOhm.
INA122UA/2K5G4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA122UA/2K5G4 Applications
There are a lot of Texas Instruments INA122UA/2K5G4 Instrumentational OP Amps applications.
- Addition operation circuits
- Band-pass filter
- Integrator circuits
- Weak signal detection
- Band-stop filter
- Power transmission
- Strain gauges
- Communication device
- Differentiator circuits
- Polarized electrodes
