Welcome to Hotenda.com Online Store!

logo
userjoin
Home

LM139DRG4

LM139DRG4

LM139DRG4

Texas Instruments

Surface Mount Tape & Reel (TR) 20mA mA 1.3 μs μs Linear Comparators 106.02dB dB -100nA pA 2mA μA 5mV mV Surface Mount

SOT-23

LM139DRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Factory Lead Time 12 Weeks
Contact PlatingGold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Weight 133.412856mg
Operating Temperature-55°C~125°C
PackagingTape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part StatusActive
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type Differential
Subcategory Comparator
Packing Method TR
Max Power Dissipation1.19W
Technology BIPOLAR
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch1.27mm
Base Part Number LM139
Pin Count14
Output Type CMOS, MOS, Open-Collector, TTL
Operating Supply Voltage28V
Number of Elements 4
Power Supplies5V
Nominal Supply Current2mA
Output Current20mA
Max Supply Current 2mA
Quiescent Current2mA
Response Time1.3 μs
Voltage - Supply, Single/Dual (±) 2V~30V ±1V~15V
Output Current per Channel 6mA
Input Offset Voltage (Vos) 5mV
Voltage Gain 106.02dB
Average Bias Current-Max (IIB) 0.025μA
Supply Voltage Limit-Max 36V
Max Input Current 100nA
Dual Supply Voltage 9V
Input Bias Current -100nA
Voltage - Input Offset (Max) 5mV @ 30V
Current - Input Bias (Max) 0.1μA @ 5V
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:4567 items

LM139DRG4 Product Details

LM139DRG4 Overview


For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, MOS, Open-Collector, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .Electronic comparator consists of 4 elements in total.Electronic comparator has 14 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -55°C~125°C in order to prevent malfunctions.The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching LM139 .As a result, this comparator displays a quiescent current of 2mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 2mA when using the device.A supply current exceeding 2mA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.You can input a maximum current of 100nA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Comparator electronics is necessary to have an operating supply voltage of 28V for normal operation.The device is packed in TR and is intended for general use (as an element in the ADC circuit).

LM139DRG4 Features


CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB


LM139DRG4 Applications


There are a lot of Texas Instruments
LM139DRG4 linear comparators applications.


  • Lithium ion battery monitoring
  • Battery management and protection
  • Current and voltage sensing
  • Analog front end
  • Power management
  • Point of load regulators
  • DC/DC and AC/DC power supplies
  • System control and monitoring
  • Wearable Devices
  • Mobile Phones and Tablets

Get Subscriber

Enter Your Email Address, Get the Latest News