LM25069PMME-1/NOPB Overview

Package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) includes it.As of now, 1 channels are available.Tape & Reel (TR)-shaped packaging is used for this product.This device has a total of 10 terminations.A device's terminal position is DUAL.10 pins make up the entire device.An efficient supply voltage is possible with 12V.There is a Surface Mount-like arrangement.In the electrical industry, this component is categoriHot Swap Controllered as Hot Swap Controller.For reliable performance, the temperature should be set to -40°C~85°C.There are General Purpose applications available for the device.An article about it appears in Latched Fault.In the case of a 2.9V~17VV power source, it should work just fine.In the LM25069 family, it appears as a number.This device operates by using 10 pins.Programmable features include Current Limit, Fault Timeout, OVP, UVLO.Hot-swappable device is estimated that there is a current supply of 1.6mA.There is a Surface Mount axis pointing in the direction of the object.For normal operation, the supply voltage (Vsup) should be kept above 2.9V in order to maintain a constant level of power.A maximum supply current of 2.4mA is required for the device to operate.This device can also be used to produce RESET THRESHOLD VOLTAGE IS 2.6 VOLT as well.There is no problem with a 19.5V output voltage if you want high efficiency.

LM25069PMME-1/NOPB Features

The terminal position of 10
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
Output voltage of 19.5V

LM25069PMME-1/NOPB Applications

There are a lot of Texas Instruments
LM25069PMME-1/NOPB hot swap controllers applications.

• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems
• Power supply hotswap & inrush control