LM2744MTC/NOPB Overview

It comes in the 14-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 3V~6V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~125°C TJ. A switching controller such as this can switch at a value of 50kHz~1MHz . dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 14 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 3.3V. Searching "LM2744" will return other relevant dc to dc converter ics. Switching converter has a total of 14 pins. There is a particular type of Switching Regulator or Controllers in switching converter. dc dc voltage regulators should have a minimum input voltage of 3V. Based on the test statistics, DC regulator outputs voltage 500mV. The dc to dc regulator is limited to 6V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator1MHz has the maximum frequency. It is suggested that users apply 6V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In a dormant state, the dc switching uses 1.5mA.

LM2744MTC/NOPB Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %

LM2744MTC/NOPB Applications

There are a lot of Texas Instruments LM2744MTC/NOPB DC to DC converter applications.

• Domestic water pumps
• Servo drive system
• Production lines
• Overvoltage protection circuits in TV sets
• Automation technology
• Scientific research
• Shearing machines
• Various CNC machine tools
• Linear guide
• Correction machines