LM2747MTCX Overview
In the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3V~6V volts and has 3V~6V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 50kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 14 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 3.3V. In addition to "LM2747", there are other relevant dc to dc converter ics you can find. There are 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 3V. DC regulator outputs 13.5V voltage based on test statistics. The dc to dc regulator can only accept 6V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 20A. Voltage regulator dc to dc is designed to operate at 86 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator1MHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 17V. In dormant mode, 1.7mA is used. During switching, this controller has a phase of 1.
LM2747MTCX Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 86 %
LM2747MTCX Applications
There are a lot of Texas Instruments
LM2747MTCX DC to DC converter applications.
- Network technology
-
- Automation technology
-
- CMM
-
- Various precision measuring instruments
-
- Various precision measuring detectors
-
- Flaw detection equipment
-
- Balance equipment
-
- Industrial robots
-
- Industrial controllers
-
- Die casting equipment
-