UCC2585MG4 Overview

As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 3V~5.5V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 500kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 3.3V. A search for "UCC2585" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 3V. Statistically, the DC regulator outputs 900mV voltage. Voltages 6.3V are the maximum that the dc to dc regulator will accept. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 485kHz. A circuit should contain 5V in order to ensure the voltage regulator dc to dc runs safely and reliably. The output of this function is the greatest value of 1A.

UCC2585MG4 Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION

UCC2585MG4 Applications

There are a lot of Texas Instruments
UCC2585MG4 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery