LM3704YAMM-308/NOPB Overview

Power management is mounted through 10 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 2 channels which are available in a series format. There are 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.2V volt supply. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 10. This power management has 10 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is always advisable to use LM3704, the base supervisor number, when searching for similar PMICs from the manufacturer.

LM3704YAMM-308/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM3704YAMM-308/NOPB Applications

There are a lot of Texas Instruments LM3704YAMM-308/NOPB Voltage Supervisors applications.

• Detection of phase loss
• Personal computers
• Satellite navigation
• WiFi router
• Low voltage/high power - AI, GPU
• Household appliances
• Unattended substation automation
• Leakage protection
• Detection of phase imbalance
• DVR