LM3722IM5-3.08/NOPB Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. You can always use LM3722, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate.

LM3722IM5-3.08/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM3722IM5-3.08/NOPB Applications

There are a lot of Texas Instruments LM3722IM5-3.08/NOPB Voltage Supervisors applications.

• FPGA design
• Personal computers
• Magnetic resonance imaging
• Rechargeable batteries
• Power distribution systems of operating room
• Military communications
• Precision measurement
• Medical-specific insulation monitor
• DVR
• Power distribution systems of infant care room