LM5041MTCX Overview

Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 15V~90V. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 200kHz 600kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Dead Time Control, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 48V. Searching "LM5041" will return other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. Voltages 90V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 1.5A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 1MHz for this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 9V.

LM5041MTCX Features

Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %

LM5041MTCX Applications

There are a lot of Texas Instruments LM5041MTCX DC to DC converter applications.

• Computed tomography (CT)
• Access control systems
• Digital display device
• Arc suppression circuits
• Geothermal power
• Ball screw pair
• Textile machinery
• Smoke prevention equipment
• Alternators
• Various precision measuring instruments