0.8mm ARM926EJ-S Microprocessor OMAP-L1x Series OMAPL138 361-Pin 456MHz 1V 361-LFBGA
SOT-23
OMAPL138BZWT4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Contact Plating
Copper, Silver, Tin
Mount
Surface Mount
Package / Case
361-LFBGA
Number of Pins
361
Operating Temperature
0°C~90°C TJ
Packaging
Tray
Series
OMAP-L1x
JESD-609 Code
e1
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
361
Terminal Finish
Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position
BOTTOM
Terminal Form
BALL
Peak Reflow Temperature (Cel)
260
Supply Voltage
1V
Terminal Pitch
0.8mm
Frequency
456MHz
Base Part Number
OMAPL138
Pin Count
361
Voltage
1.35V
Interface
Ethernet, MMC, SATA, SD, UART, USB
Max Supply Voltage
1.35V
Min Supply Voltage
1.25V
Memory Size
32kB
RAM Size
40kB
Memory Type
Cache, RAM, ROM
uPs/uCs/Peripheral ICs Type
DIGITAL SIGNAL PROCESSOR, OTHER
Core Processor
ARM926EJ-S
Data Bus Width
32b
Number of Timers/Counters
4
Core Architecture
ARM
Boundary Scan
YES
Low Power Mode
YES
Format
FLOATING POINT
Voltage - I/O
1.8V 3.3V
Number of UART Channels
3
Ethernet
10/100Mbps (1)
Number of Cores/Bus Width
1 Core 32-Bit
Graphics Acceleration
No
RAM Controllers
SDRAM
USB
USB 1.1 + PHY (1), USB 2.0 + PHY (1)
Additional Interfaces
HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART
Co-Processors/DSP
Signal Processing; C674x, System Control; CP15
Barrel Shifter
NO
Internal Bus Architecture
MULTIPLE
Security Features
Boot Security, Cryptography
Display & Interface Controllers
LCD
SATA
SATA 3Gbps (1)
Length
16mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
OMAPL138BZWT4 Product Details
OMAPL138BZWT4 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 361-LFBGA. High reliability is achieved using advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. Identify the operating temperature around 0°C~90°C TJ. In the OMAP-L1x series, it is found. The CPU is cored by a processor with a number of 0 cores. A total of SDRAM RAM controllers are used by this CPU. The microprocessor features interfaces HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART for better service. At 1.8V 3.3V, the CPU runs its I/O. A DIGITAL SIGNAL PROCESSOR, OTHER represents the uPs/uCs/Peripheral ICs type. Search OMAPL138 for variants of the embedded microprocessor. In total, 361 terminations have been made. Using a 1V voltage supply, the microprocessor should turn on and run. CPUs operate with a frequency of 456MHz Hz. You can refer to the datasheets for the functions of 361 pins. It is important to note that there is 32b bandwidth available for data transfer. An injection of 361 pins is performed inside the body of the micro processor. This CPU is widely used in many applications because of its Surface Mount mount. It is 1.35V on the CPU's core. In general, RAM (Random-Access Memory) is designed with a 40kB of 0MB. normally, the microprocessor should not receive a voltage higher than 1.35V. The lowest voltage that should be applied to the micro processor is 1.25V. A CPU is equipped with a 32kB sized memory. Counters 4 indicate how busy the CPU is. It features 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
OMAPL138BZWT4 Features
ARM926EJ-S Core 32b-Bit Data Bus Width 40kB RAM
OMAPL138BZWT4 Applications
There are a lot of Texas Instruments OMAPL138BZWT4 Microprocessor applications.