Name: OPA132UAE4
Brand: Texas Instruments
SKU: OPA132UAE4
Availability: InStock

new-10%

OPA132UAE4

Manufacturer part number:OPA132UAE4

Manufacturer:Texas Instruments

Description:1 Channels 40mA per Channel 5pA 96 dB Instrumentational OP Amps 0.00005μA 5V~36V ±2.5V~18V OPA132 8 Pins 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:OPA132UAE4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	OPA132
Pin Count	8
Number of Channels	1
Operating Supply Current	4mA
Nominal Supply Current	4.8mA
Slew Rate	20V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	96 dB
Current - Input Bias	5pA
Voltage - Supply, Single/Dual (±)	5V~36V ±2.5V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	2mV
Bandwidth	8MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	8000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00005μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Dual Supply Voltage	15V
Nominal Gain Bandwidth Product	8MHz
Max I/O Voltage	2mV
Power	NO
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA132UAE4 Product Details

OPA132UAE4 Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 2mV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 4mA . Maintain 120dB as the voltage gain. There are a total of 1 channels available on the op amps.